Small block chevy b...
 

Small block chevy build help  

  RSS
morgan109
(@morgan109)
Eminent Member

Whats everyones opinion on a 434 or a smaller variant of it? Full race trim, forged everything, high compression. I was told by a couple people that they dont like them compared to 400 and less cubes. I always figured the more the better. What high does everyone spin them to?

Chris Morgan

Chris Morgan

Quote
Posted : 26/03/2018 5:49 pm
angelwatcher44
(@angelwatcher44)
Reputable Member

I have a 355 18 degree I can spin to 11,000 if I want only push it to 9,600 in a tube chassis Berreta weighs about 2300 lbs runs 8.50 161 mph. 60 ft.1.20

ReplyQuote
Posted : 27/03/2018 8:14 am
SuperStockAMX
(@superstockamx)
Noble Member

I’ve never built a SBC but always thought if I did, it would be 377 (400 block with 350 crank) using an aftermarket block. And if I didn’t do that it would be your basic 350 or 302.

SuperStock / H
1970 390 AMC AMX
Advanced Clutches
Dual 7" Sportsman

1320/MPH=optimum ET!

NHRA SS/H
1970 390 AMC AMX
Advanced Clutches
Single 8” Billet
4300 Autolite
1320/MPH=optimum ET!

ReplyQuote
Posted : 01/04/2018 12:36 pm
Share: